1. What is a connector?
        The electronic connector generally refers to a connection unit between various electronic components, and is mainly used as a chip-to-board, circuit board, and board-to-box electronic signal connection and transmission. In terms of types, it can be divided into a connector for a substrate, an angle connector, a cylindrical connector, and a popular PCMCIA specification connector and the like.
        Although the definition of the electronic connector has not been clear, the scope of its coverage, the general understanding does not include high voltage, high current electrical or electrical connectors other than the power plug or socket: the electric switch does not include Ouchi. In Japan Most people in the industry directly use the English (Connector) transliteration, sometimes called [continuous], in China, the use of [electrical plug] or [electrical connector] including connectors and switches, regardless of the electronic, A broad term for electrical appliances. As far as applications are concerned, most electronic connectors are used in computers, telecommunications, aerospace, automobiles and various instruments.
2. Connector application
        The electronic connector is used in electrical products. As the name implies, it is an electronic number or a component connection. It is a multi-component or assembled product, and covers the key technologies of metal sheet, surface plating, precision processing and plastic molding. As the transmission and connection of the electronic number, if there is a problem with the electronic connector, the electronic component or even the entire device will be ineffective. The entire connector includes two main parts of the terminal and the plastic. In addition to the selection of the material, the plating and the die are good. It will affect the quality of the product, of course, the plastic part is the same.
3. Manufacture of connectors
        The manufacture of electronic connectors, from design to finished product, can be divided into two parts: metal and plastic. In addition to the material selection, the metal part is the main work of electroplating and die. The work of the mold is the mold design, mold opening and injection. Molding, and then with the metal component group to form an electronic connector. The electronic connector is used in electrical products. As the name suggests, it acts as a connection for electronic signals or components. It is a multi-component or assembled product and is covered with metal sheets. Key technologies such as surface plating, precision machining and plastic molding. As the transmission and connection of electronic signals, if there is a problem with the electronic connector, it will lead to the partial selection of materials, and the quality of the plating and die will affect the quality of the product. Of course, the plastic part is also the same. Its manufacturing includes five major technologies: 1. Die technology. 2. Injection molding technology 3. Electroplating technology. 4. Assembly technology 5. Detection technology. Since the trend of connectors is thin and short, and SMT, Therefore, the various manufacturing technologies required also need to improve the accuracy of their requirements, and the precise concept of the manufacturer must be changed to create a precision connector, otherwise the connector at the end Market, will be eliminated, because quality can not compete electronic components and even entire equipment failure. The connector includes a terminal and the entire plastic part of two major terminals.