Right now, it is summer heat, the power load continues to rise, and the residents have more power failures. In the process of handling residential electricity report repair, the author found that the repair of the power failure caused by poor contact burnout of the terminal was The daily repair work occupies a considerable proportion, and the problems existing in the crimping terminal should be highly valued by the grassroots power supply enterprises.

Many customers in the home of the knife gate, leakage protection installation process is not forklift fork specifications, terminal crimping wire is not very tight, plus routine maintenance is not in place, with the peak of winter electricity load, the terminal is overwhelmed, The heat is blown, which affects the normal use of electricity by resident customers.

In some metering forks, the terminal block of the electric energy meter, because some construction workers are not standardized in the installation process, the construction is saved, the two screws should be tightened, only the terminal crimping standard tightens one screw, When the electric load comes up, the trouble caused by it is constant. Some good end meter gauges are not burned due to poor contact with the hot-sinking tkp terminal of the terminal crimping tool. The situation does not affect the continuous reliability of the customer. Power supply also causes customer complaints to occur, which has brought about no negative impact on the quality service of power supply companies.

In view of the above situation, the grass-roots power supply enterprises should not only pay attention to the large-scale construction such as the capacity increase and reconstruction of the Taiwan area in the peak winter power protection work, but also the “little work” for the operation and maintenance of the low-voltage line equipment. The construction period is tight, and the construction process specifications must be implemented to ensure the quality of the project. Low-voltage operation and maintenance personnel should open each metering box, control box, and carefully check every electrical wiring. Don't be sloppy, perfunctory, and carefully check the electrical equipment and wiring in the customer's home. Sometimes That is, a small thing like tightening a screw can avoid the occurrence of a malfunction. Lianjie Electric said that it attaches importance to precautions and reduces the occurrence of blackouts. With sincere and meticulous service, customers can enjoy the comfort of electricity and live a “cool” summer.